Polypropylene Compression Fitting

Compression Fittings Reliable Manufacturers : : Polypropylene Compression Fitting, 32mm Lateral Fittings Suppliers

Polypropylene compression fitting is manufactured by the propylene as the raw material and it is available in different sizes that are from OD20mm to OD110mm diameter. The pressure rate of about PN10 and PN16 are available. The range of compression fittings we manufacture is for use with high density propylene pipes dedicated to fluid reticulation.

Polypropylene compression fitting are widely used in irrigation and drinking water systems, and this includes many items suitable for a wide range of plant engineering installation requirements. The size range of compression fittings is mostly 16mm to 110mm. All the fittings will be with a female threaded portion of 32 mm are externally reinforced with a stainless steel ring. Polypropylene compression fittings can be easily installed with an easy push in order to connect to metric polyethylene pipes.

This is mainly used to join copper piping together for both water and gas systems that provide a watertight seal between two pipes. Consisting of three parts — a filling nut, an olive, and a coupling or valve— the three parts should be installed.